[c-nsp] Transfer speed issues on 3560G

[Pavel Skovajsa]

Check whether you are not running into high CPU issues due to IRQ, due to
wrong SDM profile used.See
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_tech_note09186a00801e7bb9.shtml

-pavel

On Fri, Jun 25, 2010 at 5:52 PM, Brandon Ewing <nicotine at warningg.com>wrote:

> Thanks to all the replies, on and off list.
>
> There is no QoS configured on the switch currently.  mls qos isn't in the
> config.  Adding srr-queue bandwidth commands to the ports did not improve
> the situation.
>
> The servers in question are not on the same vLAN, we're routing between
> SVIs.  I also tested with UDP, and got the same results as before.
>
> If anyone has any additional ideas as to what to check, it would be
> appreciated.
>
> --
> Brandon Ewing                                        (
> nicotine at warningg.com)
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>