[c-nsp] Recommend router for ATM OC-12

[Rich Davies]

What if I went with the SUP2 and the Cisco OC-12/STM-4 ATM Enhanced Optical
Services Module (OSM) on a 7603?   I realize the OC-12 ATM OSM is EOL but if
unsupported/cheap is the goal will it work with the Supervisor 2 with MSFC2?

Thanks again,

-Rich


On Fri, Jun 25, 2010 at 1:38 PM, Benjamin Lovell <belovell at cisco.com> wrote:

> SUP2 will not work as I do not believe the SIP modules needed for ATM
> interfaces are supported.
>
> SUP32 should work as long as the SIP needed is supported(not 100% sure
> about SIP support on SUP32) but SUP32 can easily move this much traffic.
>
> SUP720/RSP720 will defiantly work.
>
> -Ben
>
>
> On Jun 25, 2010, at 10:50 AM, Rich Davies wrote:
>
> > Hello,
> >
> > Someone has asked me a question regarding what Cisco router platform can
> > handle an ATM OC-12.   I did some digging and it seems the 7200 platform
> > (with NPE-G1/G2) is unable to handle this.   If a 7600 (7603 actually)
> was
> > used what type of SUP/RP is needed to do ATM OC-12?  (will SUP2/SUP32
> work
> > or is RSP/SUP 720 needed)?
> >
> >
> > Thanks for any input.
> >
> >
> > -Rich
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>