[c-nsp] SCE 8000 with 2*SCM-E

[Arie Vayner (avayner)]

Mikhail,

I recommend you open a TAC case, as this could be a hardware problem,
but it requires some debugging...

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mikhail Schedrin
Sent: Wednesday, March 03, 2010 11:46
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] SCE 8000 with 2*SCM-E

Hi.
Does anybody have the experince of using SCE8000 with two SCM-E modules?
We
got the second SCM-E couple of days ago and SCE always boots in recovery
mode, when I install the second module.
I could not find any documentation about installing and configuring the
second SCM-E, I think it should work out of the box. Actually it does
not.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/