[c-nsp] BGP IPV6 strange message

[Leah Lynch (Contractor)]

What address scope are you using?

Leah

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Tomas Lynch
Sent: Thursday, March 04, 2010 11:40 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] BGP IPV6 strange message

I'm trying to setup an IPv6 neighbor on a 7206VXR with NPE-G1 and
c7200-spservicesk9-mz.122-33.SRD4.bin. All the needed IPv6 config is
there (e.g. ipv6 cef) but BGP keeps telling me:

7200(config)#router bgp $ASN1
7200(config-router)#neigh X::X remote-as $ASN2
% Link local peer outside address-family scope
7200(config-router)#address-family ipv6 unicast
% BGP: Error initializing topology

I can ping to the neighbor X::X from X::(X+1). The routers are
connected using gigabit ports.

I have google the errors but there is nothing. Anybody else had this
problem before?

-tl
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/