[c-nsp] 20G Port-Channel Drops

Albert Goerend albert.goerend at gmail.com
Wed Mar 10 17:23:10 EST 2010


On Wed, Mar 10, 2010 at 11:04 PM, Albert Goerend
<albert.goerend at gmail.com> wrote:
> On Wed, Mar 10, 2010 at 11:01 PM, James Slepicka <cisco-nsp at slepicka.net> wrote:
>> I've seen similar behavior when spanning a vlan that runs across a 10gb
>> port/port-channel to a 1Gb interface (e.g., monitor session 1 source vlan
>> 10, monitor session 1 destination int gi1/1).
>
> Ouch! Is this a bug or a feature?
> What would be the workaround?
>

Quick follow-up:

I have a monitor session on a 1G port listening to vlan2, because I
need to detect new mac addresses with arpwatch and solve possible
conflicts if two customers suddenly use the same IP address.
I turned off the monitoring session, and the port-channel is running fine!

I still need something to listen in vlan2 - what workaround can be done?

- Albert


More information about the cisco-nsp mailing list