[c-nsp] Per-user routes via RADIUS global->VRF

[Zoe O'Connell]

Hi all,

It appears, at least on 12.4(19), that if a per-user route (Cisco-AVPair
"ip:route=10.0.0.0 255.0.0.0") is delivered via RADIUS for a line that's
in a VRF (Cisco-AVPair "lcp:interface-config#1=ip vrf forwarding MYVRF")
that the route is automatically installed into the routing table of that
VRF. Is there any way anyone knows of to override this behaviour? I need
to insert a route into the global routing table pointing to within the
VRF - lab testing this it works fine doing something like "ip route
10.0.0.0 255.0.0.0 Serial1/0" where Serial1/0 is in the target VRF, but
real-world it needs to work for DSL users.

Thanks.