[c-nsp] Rate-limit input

Rick Ernst cnsp at shreddedmail.com
Thu Mar 11 14:43:40 EST 2010


If you are monitoring the incoming interface counters via SNMP, you are
going to see the "before rate-limiting" rate.  The packets are still getting
to the interface, but are being dropped if they exceed the CAR
configuration.


On Thu, Mar 11, 2010 at 10:05 AM, Khetan Sewpaul <khetan at sai.co.za> wrote:

>
> Hi,
>
> I have issue with CAR, I have a rate-limit statement on a sub-interface.
> The output rate-limit command matches, and "rates" packets towards my
> customer, but incoming packets are not being limited.    The sub-Interface
> is a Gigabit Ethernet, on a Cisco 7204 VXR NPE-400.   When I do a show int
> gig x/x rate-limit, I can see stats for the incoming limiting.   However,
> stats show that the client is not being limited, using SNMP (Cacti)
>
> Your help is appreciated
>
> --k
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list