[c-nsp] Connecting remote pops with EoMPLS?

[Andy Saykao]

Hi All,

Not sure if I'm on the right track but I want to put pc-2 on the same
ethernet segment (ip subnet) as pc-1. How do I accomplish this? Should I
be looking at EoMPLs?

Network Topology:

pc-1 -> switch-1 ->7606-1 <---> 7606-2 <-- switch-2 <-- pc-2

- All the "1' devices are geographically separated from all the "2"
devices.
- There is a /30 linking 7606-1 and 7606-2 core routers with each other.
- MPLS is already running between the 7606's.
- pc-1 is in vlan 12 with ip 172.16.70.x/24
- switch-1 and switch-2 are both WS-C3560G
- switch-1 and switch-2 are in different mst regions.

Is it a matter of creating a SVI with the xconnect config on the 7606's
- but how do I then get the switches to particpate in EoMPLS so that the
devices connected to the switch ports on switch-1 and switch-2 appear as
if they are in the same ethernet segment???
 
Thanks.
 
Andy