[c-nsp] Xconnect

[Rubens Kuhl]

1) Change the SVI to router-port
or
2) Loop a cable between two ports on the ME6524 and make the SVI
appear as a router-port subinterface.

Rubens

On Wed, Mar 17, 2010 at 1:19 PM, Mohammad Khalil <eng_mssk at hotmail.com> wrote:
>
> i configured xconnect on interface vlans between ME6524 and Cisco 7606 and didnt go up , between ME3750 and 7606 it goes fine
> when configuring between ME6524 and Cisco 7606 on interface or sub interface level it goes fine
> am i missing something ?
>
> Thanks
>
> _________________________________________________________________
> Hotmail: Free, trusted and rich email service.
> https://signup.live.com/signup.aspx?id=60969
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>