[c-nsp] c6509 booting in ROMMON

[Youssef Bengelloun-Zahr]

Once again, unbelievable !

Thanks a lot M. Cisco for making my nights easier !

Y.



2010/3/22 William McCall <william.mccall at gmail.com>

> The explanation I got from Cisco was that this is working as designed.
> During the failure, it is supposed to 0x0 to prevent a loop. I said
> "bs" but they stuck by it *shrug*.
>
> --WM
>
> On 3/22/10, Youssef Bengelloun-Zahr <youssef at 720.fr> wrote:
> > Hello all,
> >
> > Solved it, that did the trick.
> >
> > Question is : how could that happen ?
> >
> > I'd better check that my production chassis are ok :-)
> >
> > Thanks.
> >
> > Y.
> >
> >
> >
> > 2010/3/22 Youssef Bengelloun-Zahr <youssef at 720.fr>
> >
> >> Hey,
> >>
> >> Googled it, found this :
> >>
> >>
> >>
> http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a00803e5282.shtml
> >>
> >> Will that solv my problems ?
> >>
> >> Thanks.
> >>
> >> Y.
> >>
> >>
> >>
> >> 2010/3/22 Youssef Bengelloun-Zahr <youssef at 720.fr>
> >>
> >> Hello all,
> >>>
> >>> Here is the result :
> >>>
> >>> BB1.IX1#remote command switch sh bootvar
> >>>
> >>> BOOT variable =
> >>> bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXH2a.bin,1;
> >>> CONFIG_FILE variable does not exist
> >>> BOOTLDR variable does not exist
> >>> Configuration register is 0x2100
> >>>
> >>> Confregs aren't identical ? How do I change this ?
> >>>
> >>> How come is this possible ?
> >>>
> >>> Thanks.
> >>>
> >>> Y.
> >>>
> >>>
> >>>
> >>> 2010/3/22 Dale Shaw
> >>> <dale.shaw+cisco-nsp at gmail.com <dale.shaw%2Bcisco-nsp at gmail.com><
> dale.shaw%2Bcisco-nsp at gmail.com <dale.shaw%252Bcisco-nsp at gmail.com>>
> >>> >
> >>>
> >>> Hi,
> >>>>
> >>>> On Mon, Mar 22, 2010 at 10:08 PM, Youssef Bengelloun-Zahr
> >>>> <youssef at 720.fr> wrote:
> >>>> >
> >>>> > My bootvar / confreg looks correct to me, doesn't it ?
> >>>>
> >>>> What does this give you?
> >>>>
> >>>> #remote command switch sh bootvar
> >>>>
> >>>> cheers,
> >>>> Dale
> >>>>
> >>>
> >>>
> >>>
> >>> --
> >>> Youssef BENGELLOUN-ZAHR ………………………………………………
> >>> Ingénieur Réseaux et Télécoms
> >>>
> >>>
> >>> Technopole de l'Aube  en Champagne - BP 601 - 10901 TROYES  Cedex 9
> >>> Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE
> >>> Tel                 +33 (0) 825 000 720
> >>> Tel. direct      +33 (0) 1 77 35 59 14
> >>> Tel. portable  +33 (0) 6 22 42 63 80
> >>> Email            ybz at 720.fr
> >>> ……………………………………………………………………………….....www.720.fr
> >>>
> >>>
> >>
> >>
> >> --
> >> Youssef BENGELLOUN-ZAHR ………………………………………………
> >> Ingénieur Réseaux et Télécoms
> >>
> >>
> >> Technopole de l'Aube  en Champagne - BP 601 - 10901 TROYES  Cedex 9
> >> Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE
> >> Tel                 +33 (0) 825 000 720
> >> Tel. direct      +33 (0) 1 77 35 59 14
> >> Tel. portable  +33 (0) 6 22 42 63 80
> >> Email            ybz at 720.fr
> >> ……………………………………………………………………………….....www.720.fr
> >>
> >>
> >
> >
> > --
> > Youssef BENGELLOUN-ZAHR ………………………………………………
> > Ingénieur Réseaux et Télécoms
> >
> >
> > Technopole de l'Aube  en Champagne - BP 601 - 10901 TROYES  Cedex 9
> > Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE
> > Tel                 +33 (0) 825 000 720
> > Tel. direct      +33 (0) 1 77 35 59 14
> > Tel. portable  +33 (0) 6 22 42 63 80
> > Email            ybz at 720.fr
> > ……………………………………………………………………………….....www.720.fr
> >
>
> --
> Sent from my mobile device
>
> William McCall, CCIE #25044
>



-- 
Youssef BENGELLOUN-ZAHR ………………………………………………
Ingénieur Réseaux et Télécoms


Technopole de l'Aube  en Champagne - BP 601 - 10901 TROYES  Cedex 9
Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE
Tel                 +33 (0) 825 000 720
Tel. direct      +33 (0) 1 77 35 59 14
Tel. portable  +33 (0) 6 22 42 63 80
Email            ybz at 720.fr
……………………………………………………………………………….....www.720.fr