[c-nsp] Need input for router purchase

[Michael K. Smith - Adhost]

The ASR's and 7200's aren't NEBS compliant because they have the power
supplies on the back side of the router.  I think you're looking at the
GSR's, CSR's or 7600's.

Regards,

Mike

--
Michael K. Smith - CISSP, GSEC, GISP
Chief Technical Officer - Adhost Internet LLC mksmith at adhost.com
w: +1 (206) 404-9500 f: +1 (206) 404-9050
PGP: B49A DDF5 8611 27F3  08B9 84BB E61E 38C0 (Key ID: 0x9A96777D)


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Rich Davies
> Sent: Tuesday, March 30, 2010 12:35 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Need input for router purchase
> 
> Hello,
> 
> I am involved with a short-term project involving the
> purchase/installation
> of a Cisco router which is capable of the following:
> 
> - OC-12 WAN interface
> - High throughout (PPS)
> - Redundancy
> - Full routing table
> 
> I have looked at the 7600 and it is a viable option however we are
also
> looking at anything that will help cut costs down (i.e., 7206 VXR with
> NPE
> G1/G2 and so on).  One "key" thing we need is this equipment will be
> installed with a carrier that has high demands (NEBS compliancy etc).
> What would be the best router to investigate for such needs?  (ASR?)
> 
> 
> -Rich
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/