[c-nsp] Native VLAN and DHCP

Mike mike-cisconsplist at tiedyenetworks.com
Mon May 3 17:06:31 EDT 2010


Chris Gotstein wrote:
> Got lots of good suggestions.  Tried adding "spanning-tree portfast
> trunk" and that definitely helps the the AP get the correct IP address
> from the native VLAN, but as soon as i add in a second AP, i get a
> spanning-tree loop and one of the ports gets disabled.  If i remove the
> command above, then i get random IP addresses from different VLANs.
>   


Sounds like your AP's are doing WDS with oneanother....




More information about the cisco-nsp mailing list