[c-nsp] Per subnet rate limiting (6500) simple solution?

[Arie Vayner (avayner)]

Peter,

Most likely you would need to create a per-subnet class, and assign a
policer.

You may take a look at microflow policers (available only on 6500/7600):
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/con
figuration/guide/qos.html#wp1571584

Also, maybe aggregate policers may help you...
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/con
figuration/guide/qos.html#wp1571923


Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Peter Kranz
Sent: Wednesday, May 12, 2010 21:15
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Per subnet rate limiting (6500) simple solution?

Looking for a simple solution to do per-subnet rate limiting where we
have a
bunch of subnet's on the same VLAN.. we a single output interface for
this
traffic facing the customers, but lots of upstream links to the
internet..
so ideally everything could live on the customer interface..

 

Peter Kranz

 <http://www.unwiredltd.com/> www.UnwiredLtd.com

Desk: 510-868-1614 x100

Mobile: 510-207-0000

 <mailto:pkranz at unwiredltd.com> pkranz at unwiredltd.com

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/