[c-nsp] 6 T1s in a 2851

[Jay Nakamura]

What about VWIC2-2MFT-T1/E1 ?

On Wed, May 12, 2010 at 5:15 PM, Richey <mylists at battleop.com> wrote:
> I am trying to populate a 2851 with 6 WIC-1DSU-T1v2 Cards.  The first 4
> cards can fit into the WIC slots on the 2851 but I am at a loss as to how to
> get the 5th and 6th card in the box.   One page on the Cisco site recommends
> using the 2851 when terminating 6 T1s.  That same page also says the NM-2W
> will not work in a 2851.
>
>
>
> Is there a replacement for the NM-2W or is there something like a
> WIC-2DSU-T1v2 card available?
>
>
>
>
>
> I assume that by saying not supported that means it won't work at all, or
> maybe it's "It will work but don't ask us for support."
>
>
>
>
>
> http://www.cisco.com/en/US/prod/collateral/routers/ps5854/prod_qas0900aecd80
> 169bd6.html
>
>
>
> Richey
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>