[c-nsp] 6 T1s in a 2851

[Stephen Cobb]

Or the VWIC-2MFT-T1 & VWIC-2MFT-T1-DI - those are a bit cheaper per port,
used, and can be used for data. VWIC2-2MFT-T1/E1 replaced them, but the
older revs should work fine for you.

sc

-- 
Stephen F. Cobb • Senior Sales Engineer
CCNA/CCDA/DCNID/ATSP
Telecoast Communications, LLC • Santa Barbara, CA
o 877.677.1182 x272 • c 760.807.0570 • f 805.618.1610
aim/yahoo telecoaststephen

On Wed, May 12, 2010 at 7:02 PM, Richey <mylists at battleop.com> wrote:

> Thanks,  That's what I am looking for.
>
> Richey
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Seth Mattinen
> Sent: Wednesday, May 12, 2010 6:49 PM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] 6 T1s in a 2851
>
> On 5/12/2010 14:15, Richey wrote:
> > I am trying to populate a 2851 with 6 WIC-1DSU-T1v2 Cards.  The first 4
> > cards can fit into the WIC slots on the 2851 but I am at a loss as to how
> to
> > get the 5th and 6th card in the box.   One page on the Cisco site
> recommends
> > using the 2851 when terminating 6 T1s.  That same page also says the
> NM-2W
> > will not work in a 2851.
> >
> >
> >
> > Is there a replacement for the NM-2W or is there something like a
> > WIC-2DSU-T1v2 card available?
> >
>
>
> HWIC-4T1/E1
>
>
> http://www.cisco.com/en/US/prod/collateral/modules/ps5949/product_data_sheet
> 0900aecd80710c77.html
>
> ~Seth
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>