[c-nsp] 6509 Auto Qos

[Peter Rathlev]

On Thu, 2010-05-20 at 13:53 -0400, Chris Lane wrote:
> I need to run Auto QoS for a Cisco soft phone on a 6509 running IOS
> 122-33.SXH1
[...]
> any help would greatly be appreciated.

Auto-QoS is not always a very good way of doing QoS, but at least it's
very easy. On SXI it's something like:

Switch(config)# do show run int gi4/24
Building configuration...

Current configuration : 62 bytes
!
interface GigabitEthernet4/24
 no ip address
 shutdown
end

Switch(config)# interface gi4/24
Switch(config-if)# switchport
Switch(config-if)# auto qos voip cisco-phone
(loads of messages)
Switch(config-if)#
Switch(config-if)# do show run int gi4/24
Building configuration...

Current configuration : 931 bytes
!
interface GigabitEthernet4/24
 switchport
 shutdown
 wrr-queue bandwidth 20 100 200 
 priority-queue queue-limit 5 
 wrr-queue queue-limit 65 15 15 
 wrr-queue random-detect min-threshold 1 70 100 100 100 100 100 100 100 
 wrr-queue random-detect min-threshold 2 70 100 100 100 100 100 100 100 
 wrr-queue random-detect min-threshold 3 40 40 50 50 60 60 70 70 
 wrr-queue random-detect max-threshold 1 100 100 100 100 100 100 100 100 
 wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100 
 wrr-queue random-detect max-threshold 3 70 70 80 80 90 90 100 100 
 wrr-queue cos-map 2 1 1 2 
 wrr-queue cos-map 3 5 3 4 
 wrr-queue cos-map 3 7 6 7 
 rcv-queue cos-map 1 2 1 
 rcv-queue cos-map 1 3 2 
 rcv-queue cos-map 1 4 3 
 rcv-queue cos-map 1 5 4 
 rcv-queue cos-map 1 6 5 
 rcv-queue cos-map 1 7 6 
 rcv-queue cos-map 1 8 7 
 mls qos trust device cisco-phone
 mls qos trust cos
 auto qos voip cisco-phone 
end

Switch(config)#

Please test this in a lab first, and verify that the configuration suits
your needs. And be aware that there are a lot of considerations
regarding port-groups and QoS on neighboring ports.

-- 
Peter