[c-nsp] Ethernet Interfaces Speed and Duplex - Force or Auto

[Mark Tinka]

On Friday 21 May 2010 04:09:27 am Matlock, Kenneth L wrote:
> For us here, with 28,000+ Ethernet ports.
> 
> By default all our ports are set to auto. If the device
>  on the other end can't support autonegotiation, only
>  than do we hard-set ports.

Same here.

The typical cases where we've had to hard-code settings is 
when customers connect to us using media converters. Some 
don't support auto-neg.

Otherwise, auto/auto across the board = least amount of 
pain, for us.

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20100521/d4d720ab/attachment.bin>