[c-nsp] 6509 Auto Qos

[Chris Lane]

Thats interesting. I just tried it and it failed.
What line cards do you have?
What IOS
Thanks for your input.

On Fri, May 21, 2010 at 9:45 AM, Florin Florian <florin.florian at gmail.com>wrote:

> Hi Chris,
>
> I got the same problem couple of weeks ago. I wasn't able to apply AutoQoS
> on the interface and I reverse the proccess. It means I create the AutoQoS
> on the lab (emtpy SW configuration) and I applied on production. What I did
> was just to apply (copy/paste) the config on the global config and after
> that I was able to configure my interfaces for AutoQoS.
>
> I'm running AutoQoS on Cisco 4506 with Sup6E
>
> interface GigabitEthernet2/3
>      service-policy output AutoQos-VoIP-Output-Policy-queue-only
>
> interface Port-channel12
>      service-policy input AutoQos-VoIP-Input-Cos-Policy
>       service-policy output AutoQos-VoIP-Output-Policy-non-queue
>
> class-map match-all AutoQos-VoIP-Bearer-Cos
>  match cos  5
> class-map match-all AutoQos-VoIP-Control-QosGroup24
>  match qos-group 24
> class-map match-all AutoQos-VoIP-Control-QosGroup26
>  match qos-group 26
> class-map match-all AutoQos-VoIP-Bearer-QosGroup
>  match qos-group 46
> class-map match-all AutoQos-VoIP-Control-Cos
>  match cos  3
> !
> !
> policy-map AutoQos-VoIP-Output-Policy-queue-only
>  class AutoQos-VoIP-Bearer-QosGroup
>     priority
>  class AutoQos-VoIP-Control-QosGroup26
>     bandwidth remaining percent 5
>  class AutoQos-VoIP-Control-QosGroup24
>     bandwidth remaining percent 5
>  class class-default
>     dbl
> policy-map AutoQos-VoIP-Input-Cos-Policy
>  class AutoQos-VoIP-Bearer-Cos
>   set qos-group 46
>  class AutoQos-VoIP-Control-Cos
>   set qos-group 24
> policy-map AutoQos-VoIP-Output-Policy-non-queue
>  class AutoQos-VoIP-Bearer-QosGroup
>   set dscp ef
>   set cos 5
>     police cir 600000000
>  class AutoQos-VoIP-Control-QosGroup26
>   set dscp af31
>   set cos 3
>  class AutoQos-VoIP-Control-QosGroup24
>   set dscp cs3
>   set cos 3
>
> I hope that help.
>
> fflorin
>
> On Thu, May 20, 2010 at 1:53 PM, Chris Lane <clane1875 at gmail.com> wrote:
>
>> All,
>> I need to run Auto QoS for a Cisco soft phone on a 6509 running IOS
>> 122-33.SXH1
>> according to the cisco docs this feature was released with this train and
>> later.
>> i believe its my line cards which are:
>> 1   48  48-port 10/100 mb RJ45                 WS-X6148-45AF
>>  SAL085281YQ
>>  2   48  48 port 10/100 mb RJ45                 WS-X6348-RJ-45
>> SAL0540CQA4
>>  3   48  48-port 10/100 mb RJ45                 WS-X6148-RJ45V
>> SAL06499J4Q
>>  4   48  48-port 10/100 mb RJ45                 WS-X6148-RJ45V
>> SAL0750QMGV
>>
>> and i have a Sup720/3bxl
>>
>> any help would greatly be appreciated.
>>
>> Regards,
>>
>> --
>> //CL
>>   _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>


-- 
//CL