[c-nsp] transporting STM1 over IP (CEoIP)

[Arie Vayner (avayner)]

Miguel,

Take a look here:
http://www.cisco.com/en/US/prod/collateral/modules/ps6267/product_data_s
heet0900aecd805bad23.html

This is a SPA module that goes into the 7600 router, which would allow
Circuit Emulation for STM1 links.

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Miguel Mata
Sent: Tuesday, May 25, 2010 00:52
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] transporting STM1 over IP (CEoIP)

is there a way (namely modules, chassis, etc) to transport an STM1 over
IP with Cisco? I've 
only seen E1, ser or T1 over IP so far.

Please bear with me. I'm new to Cisco so many question arises when I got
to change 
technology.

Thanks in advance.


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/