[c-nsp] NATIVE_VLAN_MISMATCH

Kornelijus Survila kornholijo at gmail.com
Fri May 28 20:15:57 EDT 2010


The warning will go away if you disable CDP.

-k

On Fri, May 28, 2010 at 6:41 PM, Rick Kunkel <kunkel at w-link.net> wrote:

> Heya folks...
>
> I've connected a switch of mine to a provider's switch, and I'm getting
> CDP-4-NATIVE_VLAN_MISMATCH warnings...  but everything works fine.
>
> Is this just a harmless warning?  I'm not doing any VLANs with them. Their
> connection is going into a 3550 that has just had the nvram erased and NO
> setup done, so it's ridiculously stock.
>
> FWIW, this is actually done over an MPLS xconnect thing, but I don't think
> that factors in here...
>
> Thanks,
>
> Rick
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list