[c-nsp] OEM transceivers on IOS XR

[Tomasz Lemiech]

On Sat, 30 Oct 2010, Dmitry Kiselev wrote:

> Thanks for Your answer, but seems this is not enough to forse OEM module to work:
>
> RP/0/RSP0/CPU0:ios#sh run int te0/0/0/0
> interface TenGigE0/0/0/0
> transceiver permit pid all

Strange, "transceiver permit pid all" does the job for me, however in 1G 
ports. Haven't tried this for 10G (because my 10G optics "just work").

> RP/0/RSP0/CPU0:ios#sh controller te0/0/0/0 internal
> ...
> Pluggable Present   : yes
> Pluggable Type      : OC48-LR
> Pluggable Compl.    : (Service Un) - Failed - Bad Vendor CRC
> Pluggable Type Supp.: (Service Un) - Supported
> Pluggable PID Supp. : (Permit All) - Not Checked
> Pluggable Scan Flg: false

Maybe that is a SONET-only pluggable? (if such stuff exists at all...)

RP/0/RSP0/CPU0:CR-WAR05#sh control te0/0/0/0 phy | i Codes
Mon Nov  1 17:32:46.528 CET
         Ethernet Xcvr Codes: 10GBASE-LR,
         SONET Xcvr Codes: SDH_I_64.1 SDH_L_64

This is how it looks like for SONET+Eth XFP.

Regards,

-- 
Tomasz Lemiech
RLU#189399
TL1942-RIPE