[c-nsp] SNMP-Check of DMVPN Tunnels?

[David Prall]

I would monitor nhrp registrations and routing protocol neighbors on the
hubs. If you need to go to the spokes then the same thing from there, they
at least will have a smaller count so it will be easier to determine what is
happening from their perspective.

David

--
http://dcp.dcptech.com


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Garry
> Sent: Wednesday, November 03, 2010 4:32 PM
> To: Jonathan Herbert
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] SNMP-Check of DMVPN Tunnels?
> 
> On 03.11.2010 20:22, Jonathan Herbert wrote:
> > We just run an IGP and query throughput on the Tu interfaces. If the
> > crypto
> > socket is down, you'll end up with rxbps = 0. Seems to work well.
> 
> The problem is that both Spoke->Hub connections run through the same
> DMVPN tunnel interface ... and I would prefer not to complicate the
> configuration by adding additional tunnels ... :)
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/