[c-nsp] %PFREDUN-SP-STDBY-6-STANDBY: Failure of ACTIVE processor detected, resetting

[Antonio Soares]

The active crashed, that’s why it was not responding to the standby. The standby also crashed what was bad since the 6500 went completely down. Both SUPs went to rommon…

 

I’m the maintenance service provider here J

 

 

Thanks.

 

Regards,

 

Antonio Soares, CCIE #18473 (R&S/SP)
 <mailto:amsoares at netcabo.pt> amsoares at netcabo.pt

 

From: Eninja [mailto:eninja at gmail.com] 
Sent: sexta-feira, 5 de Novembro de 2010 20:24
To: Antonio Soares
Cc: cisco-nsp
Subject: Re: [c-nsp] %PFREDUN-SP-STDBY-6-STANDBY: Failure of ACTIVE processor detected, resetting

 

The question is why did the active SP fail to respond to heartbeat messages from the standby?

 

Grab the sh tech, crashinfo files from the former active SP and contact your maintenance service provider to troubleshoot.

 

eninja

 

www.multiven.com - simple, efficient & affordable maintenance for all networks™



 


On Nov 5, 2010, at 10:46 AM, "Antonio Soares" <amsoares at netcabo.pt> wrote:

Hello group,

Another problem I have my hands:

++++++++++++++++++++++++++++++++++++++++++++++
00:02:43: %PFREDUN-SP-STDBY-6-STANDBY: Active not responding, will be taken
down in 15 sec
00:02:43: %SYS-SP-STDBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
ensure console debugging output.

00:02:58: %PFREDUN-SP-STDBY-6-STANDBY: Failure of ACTIVE processor detected,
resetting
00:02:43: %SYS-SP-STDBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
ensure console debugging output.

00:02:58: %PFREDUN-SP-STDBY-6-STANDBY: Failure of ACTIVE processor detected,
resetting
00:02:58: %SYS-SP-STDBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
ensure console debugging output.

%Software-forced reload

00:04:31: SP-STDBY: Failed to send heartbeat poison message

Breakpoint exception, CPU signal 23, PC = 0x402DF304
++++++++++++++++++++++++++++++++++++++++++++++

The Standby crashed because it lost contact with the active ??? In fact the
active crashed, but I was expecting to have the Standby to take the
ownership of the box, not crashing as well. Do we call this redundancy ? :)

I don't find anything with bug toolkit.

6500 running 12.2.18SXF15a.

Is this a new bug ?


Thanks.

Regards,

Antonio Soares, CCIE #18473 (R&S/SP)
amsoares at netcabo.pt



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/