[c-nsp] SXI4a or SXI5

Pete Lumbis alumbis at gmail.com
Sun Nov 14 17:23:26 EST 2010


Only a guess, but I'd probably say they didn't test new code with old
rommon so they can't guarantee something won't go wrong. I've seen
plenty of times where it will work perfectly fine forever, but if they
never tested it they don't want to make people believe it will work as
advertised.

On Sun, Nov 14, 2010 at 3:45 PM, Robert Hass <robhass at gmail.com> wrote:
> On Sun, Nov 14, 2010 at 11:13 AM, Grzegorz Janoszka
> <Grzegorz at janoszka.pl> wrote:
>
>> Please note, according to release notes, you are supposed to upgrade rommon
>> of your 67xx blades to at least 12.2(18r)S1.
>> However unintentionally we had some blades running earlier rommon and SXI
>> with no problems at all.
>
> Good hint. I double checked our 6500s and noticed that nearly all
> WS-X6704-10GE plus few WS-X6748-GE-TX linecards are running rommon
> version 12.2(14r)S5. But they're running without problems on SXI4a and
> SXI5. Curious why cisco recommends to upgrade rommon if it works also
> on older version ?!
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



More information about the cisco-nsp mailing list