[c-nsp] DFC3CXL CPU

Peter Rathlev peter at rathlev.dk
Tue Nov 16 03:32:47 EST 2010


On Tue, 2010-11-16 at 10:33 +0300, Sergey Nikitin wrote:
> And once again, could anyone tell me what DFC CPU is used in the 
> WS-X6708-10G-3CXL? I believe that "remote command module X show version" 
> will show this information.

Switch#show module | incl ^  6
  6    8  CEF720 8 port 10GE with DFC            WS-X6708-10GE      XXXXXXXXXXX
  6  001d.45ff.ffff to 001d.45ff.ffff   1.3   12.2(18r)S1  12.2(33)SXI1 Ok
  6  Distributed Forwarding Card WS-F6700-DFC3C     XXXXXXXXXXX  1.0    Ok
  6  Pass
Switch#remote command module 6 show version
Cisco IOS Software, c6lc2 Software (c6lc2-SP-M), Version 12.2(33)SXI1, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Sat 28-Mar-09 10:29 by prod_rel_team

ROM: System Bootstrap, Version 12.2(18r)S1, RELEASE SOFTWARE (fc1)

 Switch uptime is 1 week, 4 days, 2 hours, 8 minutes
System returned to ROM by power-on
System restarted at 07:20:58 CET Fri Nov 5 2010
Running default software

cisco Catalyst 6000 (SB1121) processor with 1048576K bytes of memory.
Processor board ID XXXXXXXXXXX
SB1121 Processor (Rev 32)
SB-1 CPU at 400Mhz, Implementation 0x401, Rev 0.3
Last reset from power-on
123K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x100

Switch#

-- 
Peter




More information about the cisco-nsp mailing list