[c-nsp] 3560 SVI

[sthaug at nethelp.no]

> I have a odd situation. I created a SVI on a 3560 switch, assigned an IP
> address(public) without enabling ip routing and I was able to remotely
> access the switch.
> No default route added or anything like that. So how is it that I am able to
> access the switch?
>  switch is connected to another switch which has a trunk connection to a
> cisco 7206.

I believe proxy ARP is still turned on by default on Cisco IP router
interfaces.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no