[c-nsp] ACE probes failing

[krunal shah]

Check the exit code at the time of probe failure in show probe <probe_name>
detail (Last status code)


Krunal


On Mon, Nov 22, 2010 at 12:32 PM, Alex Wa <awain567 at yahoo.com> wrote:

> Hi guys,
>
> I ran into a weird issue in one of our load balancers (ACE 4710) and i was
> wondering if you guys out there have found the same behavior. for a couple
> of
> minutes all TCP probes failed but HTTP didn't, logs still show open and
> closed
> connection to front end and back end servers. the issue self recovered
> after a
> couple of minutes. any clues, hint on where to look further.
>
> any help would be highly appreciated
>
> Alejandro
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>