[c-nsp] Untagged native VLAN...

[David Allain]

Hello,

You should add the vlan 402 in the "trunk allowed vlan" list of your int
f0/44.

Regards,

David


2010/11/23 Elmar K. Bins <elmi at 4ever.de>

> After a lot of fiddling around and getting nowhere, I'll ask you :)
>
> I am trying to set up a test port - for an IP phone actually - with
> the office WS VLAN (402) native untagged, and the Voice VLAN (498)
> tagged on this 3560-48 (12.2(25)SEE4).
>
> My config looks like this:
>
> #sh run int f0/44
> interface FastEthernet0/44
>  description ekb Testport
>  switchport access vlan 402
>  switchport trunk encapsulation dot1q
>  switchport trunk native vlan 402
>  switchport trunk allowed vlan 498
>  switchport mode trunk
>  load-interval 30
> end
>
> #sh vlan dot1q tag native
> dot1q native vlan tagging is disabled
>
> #sh int f0/44 switchport
> Name: Fa0/44
> Switchport: Enabled
> Administrative Mode: trunk
> Operational Mode: trunk
> Administrative Trunking Encapsulation: dot1q
> Operational Trunking Encapsulation: dot1q
> Negotiation of Trunking: On
> Access Mode VLAN: 402 (VL-workstation)
> Trunking Native Mode VLAN: 402 (VL-workstation)
> Administrative Native VLAN tagging: enabled             # !!!
> Voice VLAN: none
> Administrative private-vlan host-association: none
> Administrative private-vlan mapping: none
> Administrative private-vlan trunk native VLAN: none
> Administrative private-vlan trunk Native VLAN tagging: enabled
> Administrative private-vlan trunk encapsulation: dot1q
> Administrative private-vlan trunk normal VLANs: none
> Administrative private-vlan trunk private VLANs: none
> Operational private-vlan: none
> Trunking VLANs Enabled: 498
> Pruning VLANs Enabled: 2-1001
> Capture Mode Disabled
> Capture VLANs Allowed: ALL
>
> Protected: false
> Unknown unicast blocked: disabled
> Unknown multicast blocked: disabled
> Appliance trust: none
>
>
> The "enabled" in the output seems to be the show's mistake, if
> a few web pages are to be believed, but...
>
> The trunk link to the phone works nicely, but connecting a stupid
> win xp laptop (phone removed from in between) does not seem to work.
>
> Wireshark shows me outgoing broadcast packets (DHCP queries) from
> my laptop untagged. I see no responses coming in though.
>
> Does anyone have an idea where I could find the culprit...?
>
> Cheers,
>        Elmar.
>
> --
>
> "Machen Sie sich erst einmal unbeliebt. Dann werden Sie auch
> ernstgenommen."
>                                                             (Konrad
> Adenauer)
>
> --------------------------------------------------------------[ ELMI-RIPE
> ]---
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>