[c-nsp] Untagged native VLAN...

[David Rothera]

Last time I checked the CDP neighbours on one of our access switches with Polycoms attached they showed up as CDP neighbours, didn't look into it though....


On 24 Nov 2010, at 16:52, Seth Mattinen wrote:

> On 11/24/10 1:33 AM, Elmar K. Bins wrote:
>> Re Nick,
>> 
>> nick at foobar.org (Nick Hilliard) wrote:
>> 
>>>>> Will try that - this sounds like the easiest way, although I dislike
>>>>> special constructs normally. But - this would allow me to keep the
>>>>> portfast setting which definitely helps when dealing with workstations...
>>> 
>>> This isn't a special construct: it's the recommended way to handle cisco voip phones 
>>> with desktop ethernet support.
>> 
>> Sure, but: This is not a Cisco phone. It works nonetheless, so CDP seems to
>> not be really necessary. Further testing notwithstanding, of course.
>> 
> 
> I use it fine with Polycom phones.
> 
> ~Seth
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/