[c-nsp] No DOM support for X2 optics on Cat 4900M?

[Gregor Friedrich]

Hi List

is there really no DOM support for x2 optics on the 4900M? I have
X2-10GB-SR and LX4 optics and the output of sh int transceiver is empty,
IOS is 12.2(53)SG3.

The Cisco Digital Optical Monitoring Compatibility Matrix says
X2-10GB-SR, supports DOM, LX4 not??


But on the 3650E  (12.2(50)SE3) I got this lines:


Te0/1      connected    trunk        full    10G 10GBase-LX4
Te0/2      notconnect   trunk        full    10G 10GBase-LX4

                                  Optical   Optical
            Temperature  Voltage  Tx Power  Rx Power
Port       (Celsius)    (Volts)  (dBm)     (dBm)
---------  -----------  -------  --------  --------
Te0/1        49.8       0.00      -5.1       0.1
Te0/2        50.1       0.00      -5.2     -40.0


Thanks for any hint

Gregor

-- 
Gregor Friedrich
System Administration & Webmaster BIOTEC TU-Dresden
Tatzberg 47/49
01307 Dresden Germany
phone: +49-351-463-40069
email: gregor.friedrich at biotec.tu-dresden.de