[c-nsp] rate limit

[Keegan Holley]

On Sun, Nov 28, 2010 at 8:50 AM, Mohammad Khalil <eng_mssk at hotmail.com>wrote:

>
> hi all
>
> i have Cisco 7606-S with IOS c7600s72033-advipservices-mz.122-33.SRD4.bin
> i am trying to rate limit outbound traffic on interface vlan , but no rate
> limit or traffic shape command is there ?
> what is the proper solution if applicable
>
> Those are more or less legacy methods.  They recommend doing everything
with the MQC (Modular QOS CLI).  It's the policy map+policer combination
that the other poster referred to.  This should get you started.

http://www.cisco.com/en/US/technologies/tk543/tk545/technologies_white_paper09186a0080123415.html