[c-nsp] Outside NAT issue

[Robert Maier]

the static seems to be correct, hast the router a default route to the 
firewall ?

Am 29.11.2010 14:34, schrieb Bunny Singh:
> HI,
>   
> I have a ASA Firewall 5550 connected to both outside and customer interface. Default route is there towards outside interface (Internet). 7600 router is connected towards customer interface and ospf is running.
>   
> Now i have one private network  (10.10.10.0/24) on 7600 router. I want to access one machine having IP 10.10.10.15 from other place via internet (it required to be access from anywhere internet) . I have tried to do the static nat for the same ip in firewall, but still i am not able to receive the icmp reply. I have checked through wireshark and found that the source coming to the 10.10.10.15 was 77.77.77.77 which is not available on the 7600 router but reachable through firewall.
>   
>   
>    following are the command
>   
> static (customer,outside) 119.252.X.X 10.10.10.15 255.255.255.255
>   
> (we have our own public ip's i.e 119.252.x.x)
>   
>   
> So how i can access the machine or any other config i can to fullfill my requirement.
>   
> Regards
> Bunny
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>