[c-nsp] STM-1 loop prevention

[Gert Doering]

Hi,

On Wed, Oct 06, 2010 at 02:58:27PM +0300, RAZAFINDRATSIFA Rivo Tahina wrote:
> During test performed by the provider, they did physical loopback on 
> interfaces, that causes the box to crash, is there an option the 
> interface down when loop is detected?

Normally this is exactly what happens - the interface goes to 
"up/down(looped)" state.

If the box crashes when a STM-1 is looped, take the box and hit your 
Cisco sales representative with it - this is an absolutely no-go...

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20101006/c5b51d14/attachment.bin>