[c-nsp] IOSXR .. Complicated when you're doing migration

[Raymond Leung]

Oliver :

Thanks for your help , it's already save us many many times for migration task

Cheers mate
Raymond

On Tue, Oct 12, 2010 at 5:21 PM, Oliver Boehmer (oboehmer)
<oboehmer at cisco.com> wrote:
>
>> What will you do when using IOSXR to show you all information
>> associated with the interface ? It's very complicated when you are
>> doing migration task on IOSXR
>
> you can try "show run formal | include <interface>":
>
> RP/0/RP0/CPU0:<node>#show run formal | include TenGigE0/2/0/0
> interface TenGigE0/2/0/0 description ...
> interface TenGigE0/2/0/0 cdp
> interface TenGigE0/2/0/0 mtu 9014
> interface TenGigE0/2/0/0 service-policy output egress-qos
> interface TenGigE0/2/0/0 ipv4 address ...
> interface TenGigE0/2/0/0 carrier-delay up 1000 down 100
> interface TenGigE0/2/0/0 dampening
> router ospf 1002 area 0 interface TenGigE0/2/0/0
> router ospf 1002 area 0 interface TenGigE0/2/0/0 bfd minimum-interval 50
> router ospf 1002 area 0 interface TenGigE0/2/0/0 bfd fast-detect
> router ospf 1002 area 0 interface TenGigE0/2/0/0 bfd multiplier 3
> router ospf 1002 area 0 interface TenGigE0/2/0/0 message-digest-key 1
> md5 ...
> router ospf 1002 area 0 interface TenGigE0/2/0/0 network point-to-point
> mpls ldp interface TenGigE0/2/0/0
>
> hope it helps
>
>        oli
>