[c-nsp] C6K EoMPLS Rate Limiting

[Benjamin Lovell]

I am a little rusty on PFC QoS but this should work. It would be hardware based. I have not run across an example of a 6K punt to CPU for QoS. Don't even think it can happen. Pretty sure it just ignores QoS features that are not supported.

-Ben

On Oct 20, 2010, at 6:04 AM, Manu Chao wrote:

> AFAIK it is possible on a C6K to rate limite a EoMPLS interface with
> standard IOS MQC command.
> 
> Is it softwared based or hardware based?
> 
> Regards,
> Manu
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/