[c-nsp] Routing performance of ME3400

[Eric Van Tol]

> -----Original Message-----
> From: Garry [mailto:gkg at gmx.de]
> Sent: Thursday, October 28, 2010 9:22 AM
> To: Eric Van Tol
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Routing performance of ME3400
> 
> On 27.10.2010 16:42, Eric Van Tol wrote:
> > Hello,
> > Check your SDM template - you probably have it set to 'layer-2' when it
> should be 'default' for layer 3 routing.
> 
> Customer confirmed ... did some more performance tests, switch is now
> operating at decent performance ... :)
> 
> Thanks again for the hint! S at cks though that the option isn't shown in
> the config ...
> 
> -garry

No problem - we ran into this on a few of our switches, too.  I always thought it was counterintuitive that they named the Layer 3 SDM 'default' even though it really isn't the default SDM template.

-evt