[c-nsp] OEM transceivers on IOS XR

[Dmitry Kiselev]

Hello!

On Fri, Oct 29, 2010 at 10:53:30PM +0100, Nick Hilliard wrote:

> On 29/10/2010 17:43, Dmitry Kiselev wrote:
> > Could someone in list advise me IOS XR command[s] equal to IOS sequence
> > 
> > service unsupported-transceiver
> 
> this is the same command in XR.
> 
> > no errdisable detect cause gbic-invalid
> 
> I'm not sure if there is an equivalent command to this in XR.


Thanks for Your answer, but seems this is not enough to forse OEM module to work:

RP/0/RSP0/CPU0:ios#sh run int te0/0/0/0
interface TenGigE0/0/0/0
 transceiver permit pid all
!
RP/0/RSP0/CPU0:ios#sh run | inc service
Building configuration...
service unsupported-transceiver

RP/0/RSP0/CPU0:ios#sh int te0/0/0/0
TenGigE0/0/0/0 is down, line protocol is down
...

RP/0/RSP0/CPU0:ios#sh controller te0/0/0/0
Operational data for interface TenGigE0/0/0/0:

State:
    Administrative state: enabled
    Operational state: Down (Reason: Security failure (not a valid part))
    LED state: Yellow On
...

RP/0/RSP0/CPU0:ios#sh controller te0/0/0/0 internal
...
Pluggable Present   : yes
Pluggable Type      : OC48-LR
Pluggable Compl.    : (Service Un) - Failed - Bad Vendor CRC
Pluggable Type Supp.: (Service Un) - Supported
Pluggable PID Supp. : (Permit All) - Not Checked
Pluggable Scan Flg: false



How people solve such problem on IOS XR?
Thanks!

-- 
Dmitry Kiselev