[c-nsp] nhrp/dmvpn network-id
Pete S.
pshuleski at gmail.com
Wed Sep 8 22:51:59 EDT 2010
nhrp network-id is a locally significant. Think OSPF process ID. Much as
you keep the OSPF process ID the same across a domain for sanity, Cisco
recommends you keep the nhrp network-id the same on a single NHRP
network(hub interface, and spokes) as a quick reference for what tunnel
interface it terminates to on the hub.
So as you tested, you can use different network-id values on the spokes, as
the network-id only matters locally. Or you can do crazy things, on the
hub, like bind two GRE tunnels to the same NHRP network(dmvpn cloud).
--Pete
On Wed, Sep 8, 2010 at 9:13 PM, danger will <myniuid at yahoo.com> wrote:
> Hi there
>
> i’ve been bashing my head around this problem for a few days please help
>
> ip nhrp network-id this is used to turn on nhrp on an interface and to
> provide the logical membership to a certain DMVPN cloud, otherwise
> stated each DMVPN cloud should have it’s unique network id, at least this
> is what all the design guides recommend.
>
> What i did in my lab was to have each spoke and the hub in different
> DMVPN clouds meaning spoke one had network-id 1 , spoke 2 had network-id
> 2, hub had network-id 3 etc and it seemed to work just fine so i don't
> understand the use of “ip nhrp network-id” and i can't seem to find a
> document to explain this in greater detail
>
> Thanks
>
More information about the cisco-nsp
mailing list