[c-nsp] ASIC to switch port mapping

[Vincent Aniello]

This is on a 3650E switch.

Thanks.

--Vincent

-----Original Message-----
From: Nick Hilliard [mailto:nick at foobar.org] 
Sent: Friday, September 10, 2010 1:31 PM
To: Vincent Aniello
Cc: Heath Jones; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] ASIC to switch port mapping

On 10/09/2010 18:18, Vincent Aniello wrote:
> I am trying to solve a output drops on switch ports on which bandwidth
> utilization does not seem to exceed the port speed.  Seems like the
> drops are due to the buffers filling up and dropping frames.  I am
under
> the impression that each ASIC has their own buffer and if the buffer
> fills on a particular ASIC all ports that share that ASIC will also
drop
> frames.  If I know the switch interfaces associated with each ASIC I
can
> redistribute the connections on the switch to better balance the load.

What sort of card are you using?

Nick



Disclaimer: Any references to Pipeline performance contained herein are based on internal testing and / or historic performance levels which Pipeline expects to maintain or exceed but nevertheless does not guarantee.  Congested networks, price volatility, or other extraordinary events may impede future trading activities and degrade performance statistics. Pipeline is a member of FINRA and SIPC.