[c-nsp] REP support on 7600

[Brian Johnson]

I'm doing it on WS-X6704-10GE cards without issue. My largest segment is
26 nodes and it is fast and reliable.

AFAIK.... You should be able to run REP on any switching interface with
an IOS that supports REP.

Brian J.


>-----Original Message-----
>From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
>bounces at puck.nether.net] On Behalf Of Danijel
>Sent: Monday, September 06, 2010 3:36 AM
>To: cisco-nsp at puck.nether.net
>Subject: [c-nsp] REP support on 7600
>
>Hi,
>
>Anyone know if REP is only supported on ES line cards or is is possible
to
>use something like WS-X6724-SFP and configure REP rings from it?
>
>Also, anyone using REP in a larger rings?
>
>We are are currently planning a small metro network with me3400
switches
>and
>are looking for a aggregation point for the rings. 7600 looks nice but
those
>ES cards are pretty expensive.
>
>thnx,
>Danijel
>
>--
>*blap*
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/