[c-nsp] Multi Area OSPF

Asbjorn Hojmark - Lists lists at hojmark.org
Wed Sep 15 16:52:27 EDT 2010


On Wed, 15 Sep 2010 11:32:05 +0100, you wrote:

> The 1812 is set as a stub with no other routing protocols being used.
> When I use the redistribute static or redistribute connected commands
> it advises these cant be used as the router is an asbr.  The router
> is only running 1 ospf process for the stub area so I am not sure why
> this is occurring.

Don't redistribute into the area. Just use network statements for the
connected networks that you want the router to advertise into the
area.

If you need to redistribute something into the area (including static
routes), you're using the wrong area type.

-A



More information about the cisco-nsp mailing list