[c-nsp] Embeded Packet Capture for DHCP Troubleshooting

[Heath Jones]

If the problem was portfast (which is a very good suggestion as it
causes problems with a whole bunch of things when listening at the
start), the following would not work..

>  And from the switch side - no errors or flaps. And the trouble is the clients in question don't ever fully complete the DHCP transaction upon power up to assign an ip - so they can't connect -but if I assign an IP manually on the client - then they can connect right up to Citrix servers.

Is it the case that the hosts get them sometime after the first 30
seconds, stop making requests, and that manual assignment is not
required?