[c-nsp] Found a device, please recommend.

[Benjamin Lovell]

For 8SFPs of the top of my head you are looking at something like an  
ASR 1K or 7600.

For 4-5 full route tables 1G wil be cutting it close or just be not  
enough. BGP mem usage is hard to gauge as we take a lot of effort to  
use pointers to reduce mem usage when prefixes / attributes overlap.  
Without kowning how much overlap there is between your feeds it's hard  
to know how much mem they will use but 2GB would be a safe amount.

-Ben


On Sep 29, 2010, at 8:52 PM, Sheremet Roman wrote:

> Hi,
>
> I want  order Cisco device (Layer 3) with 8 SFP ports, i want RUN BGP
> (4-5  fullview) in it.. so i think 512 - 1024 Mb RAM needed.
> Device Should be 1U.
>
> Please recommend which device will be optimal for this request?
>
> Regards,
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
           .            .          Benjamin Lovell
           |            |          AS Video Practice
          |||          |||         Cisco Customer Advocacy
        .|||||.      .|||||.       Research Triangle Park, NC
     .:|||||||||:..:|||||||||:.    Email:  belovell at cisco.com
              cisco            desk:919.392.8255 cell:203.509.1562
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~