[c-nsp] service-policy on 2960 doesn't shape

[Jean-Etienne Kelly]

Do you have this line on the top part of your running-config ?

mls qos

QoS will not work without it. I've done the same error.

J-E

Le 2011-07-29 11:40, Nikolay Shopik a écrit :
> I'm trying to configure service policy on interface but it seems not
> working at all. While same config working on old 2950. Here is sample of
> it. 2960 running on 12.2(55)SE3. Any ideas?
>
> policy-map 10Mbit
> class class-default
> police 10000000 512000 exceed-action drop
>
> interface FastEthernet0/4
> switchport access vlan 4
> spanning-tree portfast
> service-policy input 10Mbit
>
> And output of command show policy-map int.
>
> show policy-map int
> FastEthernet0/4
>
> Service-policy input: 10Mbit
>
> Class-map: class-default (match-any)
> 0 packets, 0 bytes
> 5 minute offered rate 0 bps, drop rate 0 bps
> Match: any
> 0 packets, 0 bytes
> 5 minute rate 0 bps
>
> Before this config I did tried configure it with access-list with same
> result, so I trying just match anything.
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>