[c-nsp] 802.1q , tag and untag

[Ramses Rios]

Hi 

If you want to enable 802.1q in one switch port via CLI for example for GigabitEthernet1/0/5:

interface GigabitEthernet1/0/5
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 2,800 { 2 and 800 are the VLANIDs  included in this 802.1q link, vlan tag in L2}
switchport mode trunk

best regards!


Ramsés Ríos

________________________________________
De: cisco-nsp-bounces at puck.nether.net [cisco-nsp-bounces at puck.nether.net] En nombre de Deric Kwok [deric.kwok2000 at gmail.com]
Enviado el: viernes, 12 de agosto de 2011 20:51
Para: Cisco Network Service Providers
Asunto: [c-nsp] 802.1q , tag and untag

Hi all

How can I create the 802.1q vlan in cisco switch?

How can I put the tag and untag on the port.

ls it same as native vlan?

Thank you so much
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/