[c-nsp] A bit of 6513-E confusion

[quinn snyder]

c6513-e behaves same as non-e chassis without sup2t[0]

[0]
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/qa_c67-6214
10.pdf

regards,
q.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Drew Weaver
Sent: 17 August, 2011 11:28
To: cisco-nsp
Subject: [c-nsp] A bit of 6513-E confusion

With a 6513-E would you be able run it with:

2xSUP720-3BXLs
10xWS-6748(/w DFCs)
1x WS-6708?

I don't need the 10/100/1000 ports to be "line rate" either.

I know in the regular 6513 you can only put the higher-end cards in the last
few slots, but I can't really find out if that is still true on the 6513-E.

Has anyone been brave enough to try it and could you share your results?

thanks,
-Drew


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/