[c-nsp] WARNING: Netflow Data Export & Hardware assisted NAT not supported on 76xx/65xx on the same interface

[Phil Mayers]

On 08/26/2011 05:25 PM, Matthew Huff wrote:

> I'm looking at using SPAN to replicate the data and send it to a
> linux box to then create netflow data exports, however, given the

I would instead consider moving the NAT somewhere else, and leaving the 
Netflow on the box. The hardware-assisted NAT feature in the 6500/7600 
has the feel of an "abandoned" feature; one that Cisco would rather you 
didn't use, and are sorry they ever implemented.