[c-nsp] Cisco 6500/SUP720-3B EtherChannel Sample ?

[Peter Rathlev]

On 8/27/11 10:49 PM, "Jon Harald Bøvre" <jon at bovre.no> wrote:
> add command 'channel-group 5 mode on' to interface. This creates
> port-channel interface

On Sat, 2011-08-27 at 23:36 -0700, Gregori Parker wrote:
> Best practice is to enable udld on these and set channel-group mode to
> desireable

I'd say mode "active" instead, using LACP instead of PAgP, is the best
practice. Any reason to not prefer the standardised LACP?

-- 
Peter