[c-nsp] Multicast question

[David Prall]

Found this via a quick search:
http://www.cisco.com/en/US/docs/ios/12_4t/ip_mcast/configuration/guide/mctls
plt.html

I was thinking about 2 distinct RP addresses, using spt-threshold infinity
so it stays on the shared tree, and having the route to the RP preferred
over one link. Hopefully the above is better than my quick thoughts.

David

--
http://dcp.dcptech.com



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of henrry huaman
Sent: Monday, December 05, 2011 9:13 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Multicast question

Hi Guys,
We have the next scenary:

R1- e0/0---------------e0/0- R2
     \ e0/1---------------e0/1--/

And, we want to have differents groups multicast passing by its own path.

Is possible to configure any feature "PBR" with multicast?

R1  e0/0 ------- only group 239.32.32.32-------- e0/0  R2
R1 e0/1 ------- only group 239.33.33.33--------e0/1 R2

Thanks.



Henry
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/