[c-nsp] VPN L2L connecting to SSL VPN user?

[Scott Voll]

I think that was the one I was asking about.... unfortunately I already
have it.... must be my config.  Thanks.

Scott

On Tue, Dec 6, 2011 at 9:17 AM, Ryan West <rwest at zyedge.com> wrote:

> On Tue, Dec 06, 2011 at 12:12:39, Scott Voll wrote:
> > Subject: [c-nsp] VPN L2L connecting to SSL VPN user?
> >
> > I have a ASA at the hub and IPSEC VPN tunnels back to it from home
> offices.
> >  I also use this ASA to head end all my road warrior anyconnect traffic.
> >
> > For some reason I can not place a call between the Home office and the
> > road warrior.  All ACL's look to be setup correctly.  is there a
> > command I might have missed to allow the IPSEC tunnels to communicate
> with the SSL VPN users?
> >
>
> Same-security-traffic permit intra-interface?
>
> -ryan
>